top of page

How to Choose the Right Light Bulb: 6 Things on the Box

1 day ago
5 min read

You went out for one light bulb and came home with a headache, because the box had more numbers on it than a lottery ticket. :) Let me explain what they mean.


Not all of those numbers matter equally. There are six things to read on the box: lumens, Kelvin, CRI, the fitting, watts and the energy class. Here they are one by one, with the numbers to look for.


First, the type of bulb: buy LED

There are four main types of bulb: LED, incandescent, fluorescent and halogen. For a home, LED is the most suitable and the cheapest to run. If you are under 25, I probably lost you at "incandescent" anyway. :) So everything below is about LED bulbs.


The six things to read on the box

A typical box looks like this: 800 lm, 2700 K, CRI 90, E27 and 8 W, with a coloured energy label beside them. The numbers in the sketch follow the order of the headings below.


Sketch of a light bulb box showing 800 lm, 2700 K, CRI 90, E27, 8 W and an A to G energy label, numbered 1 to 6
The six things on the box: 1 lumens, 2 Kelvin, 3 CRI, 4 fitting, 5 watts, 6 energy class.

1. Lumens: how bright is the bulb?

The most important value on the pack is lumens, written lm. The higher the lumens, the brighter the bulb.


This is how to work out how much light a room needs in total:


  • Living room and bedroom: 1000 to 2000 lumens for every 10 square metres

  • Kitchen and bathroom: 3000 to 4000 lumens for every 10 square metres


So a 20 square metre living room needs 2000 to 4000 lumens in total. Don't expect that from a single bulb: add up the lumens of every bulb in the room. If you have a ceiling light with several bulbs, 400 to 500 lumens per bulb is enough.


Many warm filament bulbs hanging at different heights from a dark ceiling
The more bulbs share the light, the fewer lumens each one needs.

A tip if you're used to old incandescent bulbs: these are the approximate lumens to look for.


  • Instead of an old 40-watt bulb: about 470 lumens

  • Instead of 60 watts: about 800 lumens

  • Instead of 75 watts: about 1050 lumens

  • Instead of 100 watts: about 1500 lumens


2. Kelvin: is the light yellow or white?

Kelvin (K) tells you the colour of the light, also called colour temperature. The lower the number, the more yellow the light. For living rooms and bedrooms the best value is 2700 K, which is warm white and has a lovely soft yellow to it.


Don't trust the names on the box. "Daylight" sounds like a sunny afternoon, but real daylight is 5000 K and above, which indoors means bright white, like a laboratory. Read the number instead. I've gone through which Kelvin suits which room in Warm white or cool white?.


3. CRI: do colours look the way they should?

This is the value people check least on the box and notice most at home. CRI, which some boxes call Ra, scores how accurately the light shows colours on a scale from 0 to 100, and 100 means no colour distortion at all.


When the CRI is low, tomatoes look pale, your face looks tired, and you only find out which sock was navy and which was black once you're out in the street. 😂 The bulb is to blame, not you.


The rule is clear:


  • Everywhere in the home: at least 80

  • Wherever you judge colour, which means the kitchen worktop, the bathroom mirror and in front of the wardrobe: at least 90


On some boxes the CRI hides inside a three-digit code. The first digit is the CRI and the last two are the Kelvin: 827 is a bulb with a CRI in the 80s at 2700 K, and 930 is a bulb with a CRI in the 90s at 3000 K. If the box mentions neither CRI nor Ra, don't put that bulb anywhere you judge colour.


4. The fitting: will the bulb actually fit?

The fitting, or cap, is the part of the bulb that goes into the lamp. The most common one is E27. The E means a screw cap and the number is the diameter of the screw in millimetres: 27 mm for E27, and 14 mm for the smaller E14. GU10, which you often see in spotlights, has no screw: it has two pins, 10 mm apart. In the UK many lamps take a B22 bayonet cap instead, which is 22 mm across and goes in with a push and a twist.


Sketch of three bulb caps: E27 with a 27 mm screw, E14 with a 14 mm screw and GU10 with two pins 10 mm apart
From left to right E27, E14 and GU10: the number is the diameter of the screw, or the distance between the two pins, in millimetres.

A bulb that doesn't fit the lamp is no use to you, however beautiful its light. Take the old bulb to the shop with you, or take a photo of the writing on it.


5. Watts: the number that confuses everyone

That W is the least important number on the box, and the one that confuses people most. Some boxes say "4 W = 60 W". Just listen to that. By the same logic, 2 + 2 = 44. :)


Let me explain. When incandescent bulbs were everywhere, watts told you how bright a bulb was: a 60-watt bulb was brighter than a 40-watt one. With LEDs that no longer works. Watts only tell you how much electricity the bulb uses, and the second number is there for nostalgia. What the box is saying is: "This LED bulb uses 4 watts but gives you the brightness of an old 60-watt incandescent bulb, so relax."


For brightness, read the lumens, not the watts.


6. Energy class: which bulb uses less electricity?

The coloured label on the box shows the energy class. The classes run from A to G and A is the most efficient: the greener, the better.


You can also compare without the label: the bulb that gives the same lumens for fewer watts is cheaper to run. If one bulb gives 800 lumens using 5.9 watts and another needs 8 watts, buy the 5.9-watt one.


With the box in your hand

  • Lumens: 1000 to 2000 for every 10 square metres of living room and bedroom, 3000 to 4000 for kitchen and bathroom

  • Kelvin: 2700 K for living room and bedroom

  • CRI: at least 80, and at least 90 wherever you judge colour

  • Fitting: the same as your old bulb, usually E27 or E14, or B22 in the UK

  • Watts and energy class: the bulb that gives the same lumens for the fewest watts

  • Dimmer: if you have one, the box must say "dimmable"


The bulb is sorted, but where does the lamp go?

That is everything you need to know to buy a bulb. Lighting itself is a much bigger subject, because where a lamp goes depends on where the sofa, the table and the bed go. The layout comes first, and the light follows.


If you're unsure about the layout, colour, furniture and shopping decisions in your home, the online interior design sessions are where we settle them together, using your measurements and photos. After the session you receive a layout plan, product suggestions, the session recording and a summary by email.


Now you know what every number on the bulb box is telling you. Now it's the shelf's turn to be nervous. 😂

Comments

Rated 0 out of 5 stars.
No ratings yet

Add a rating
bottom of page